FÄSSLER D - 250 H5

•  
  Reference number 1049-0337091

  Manufacture Year 1983

  Operation Hours not applicable

• Vendor

  Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
  James-Watt-Straße 12
  72555 Metzingen

  Germany

  

• Main Category

  Metal working machines

• Category

  Gear Cutting Machines

• Type of Machine

  GEAR FINISHING MACHINERY

• Sort of Machine

  Gear Honing Machines

• Manufacturer

  FÄSSLER

• Technical data

  workpiece diameter

  250 mm

  centre distance

  0 mm

  honing length max.

  mm

  max. module

  5

• Description

  Gear Ø, min./max. 10 / 250 mm
  Module range 1 - 5
  Length of teeth / max. table stroke 500 mm
  Height of centres of tailstocks 220 mm
  
  Max. weight of workpiece 50 / 100 kg
  Honing head swivelling +/- 35 °
  
  Speeds of honing tool 20 - 500 rpm
  Size of honing tool, Ø x width 300 x 40 mm
  
  Workpiece speeds 500 - 3,000 rpm
  Total adjustment of cross slide 270 mm
  Rapid traverse of cross slide 50 mm
  Infeed travel of cross slide, mechanical 1 - 8 mm/Ø
  Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec
  
  Table speeds, hydraulic 0 - 6 m/min
  
  Total electrical load 5.5 kW - 380 V - 50 Hz
  Weight 3,200 kg
  
  Accessories / Special Features
  * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter.
  * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc.
  * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped).
  * Separate honing oil unit with magnetic separator and fine filter.
  * Mechanical tailstocks for manual loading. * Oil mist separator.
  * Sliding doors with foot switch. * Separate hydraulic unit.
  
  
  Condition : Good. Machine can be inspected under power.
  Delivery : Ex stock, as inspected.
  Payment : Net, after conclusion of contract.
  
  We have a large selection of gear machines available. Please let us know your requirements.
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• State

  Used